DURAN® Measuring cylinder, low form, with spout, hexagonal base, with graduation, 500 ml
Capacity - ml |
500
|
Diameter (d) - mm |
65
|
Height (h) - mm |
250
|
Accuracy limits - ml |
5
|
Graduation - ml |
10
|
Material |
Glas
|
Colour |
Helder
|
- The large hexagonal base prevents the cylinder from rolling. The base is equipped with three knobs which increase its stability. The cylinders have uniform wall thickness over the entire measurement range, so wedge errors are avoided. Calibration is based on the poured in volume (“In”) at a + 20 °C reference temperature. Mixing cylinder accuracy limits conform to DIN and ISO standards (class B).
|
- Typical applications: holding and simultaneous measurement of varying liquid amounts.
|
- DURAN® volumetric products have closely calibrated scales that permit very accurate determination and measurement of volumes. DURAN® products are available in two accuracy classes: class A/AS and class B. The two classes differ in the accuracy of measurement with class A being the highest accuracy class and class B being approximately half that of class A. Class AS has the same tolerances as class A, but is designed to permit more rapid outflow.
|
- To ensure a long service life for your volumetric glassware and to exclude possible volume changes, these products should not be heated above +180 °C in drying cabinets or sterilisers.
|
- Never heat volumetric glassware on a hot plate.
|
- Always heat up and cool down volumetric glassware gradually, to avoid thermal stresses and thus any possible breakage of the glass.
|