DURAN® Gas washing bottle, screw-cap system with Drechsel-head with filter disc adjustable immersion, 500 ml
Capacity - ml |
500
|
Porosity |
1
|
Neck |
GL45
|
Tubulature/side neck |
9 mm
|
Material |
Glas
|
Colour |
Helder
|
- With screw-connection system. The insertion height of the head is adjustable. The distribution of the gas in the liquid is carried out through the filter disk and thus the absorption efficiency significantly increased. Gas washing bottles also work reliably at high flow rates. Individual parts can also be ordered separately.
|
- Typical applications: cleaning (“washing”) of gases with solvents.
|
- Due to their high chemical and thermal shock resistance DURAN® filters and the corresponding filter plates are ideal for separations, e. g. with strong acids or alkalis. Thus they offer advantages in comparison with other materials such as plastic or paper. DURAN® filter products have a maximum operating temperature of +450 °C and are therefore far superior to other materials.
|
- Uniform heating is recommended to avoid thermal stresses and resultant breakages.
|
- The heating or cooling rate should not exceed 8 °C/min.
|
- When filtering hot substances observe the thermal shock resistance and, if necessary, preheat the filtration apparatus in a drying cabinet.
|
- Wet filtration apparatus should be heated slowly up to +80 °C and dried for one hour before increasing the temperature further.
|